Detection Technology camera | Prediktera Documentation

Default values on initialization

Op code	Operation name	Value	Explanation and default
`0x22`	Operation Mode	`0x00`	Continuous mode
`0x30`	Gain Correction	`0x00`	Disable gain correction
`0x31`	Offset Correcting	`0x00`	Disable offset correction
`0x32`	Baseline Correcting	`0x00`	Disable baseline correction
`0x3B`	PDC correction	`0x00`	Disable PDC correction
`0x40`	Pixelbinning	`0xNN`	0x00 or GUI input
`0x41`	Line averaging, the filter size is 2ⁿ	`0x00`	n = 0
`0x43`	Output scale	`0x00`	Original
`0x44`	Offset averaging filter	`0x00`	1 line
`0x51`	External Line Trigger Status	`0x00`	Disable external line trigger
`0x55`	External Frame Trigger Status	`0x00`	Disable external frame trigger
`0x5A`	Trigger stamp parity check mode	`0x00`	Disable parity check
`0x60`	Period of heartbeat packets	`0x3C`	Every 60 seconds
`0x61`	X-GCU type	`0x00`	Ethernet
`0x6A`	Test pattern status	`0x00`	Disable
`0x6B`	DM’s test mode	`0x00`	Disable
`0x75`	LED lights	`0x00`	Disable
`0x7A`	Pixel order mode	`0x00`	Low from first, High from first
`0x7B`	Energy mode	`0x01`	DE stacked
`0x90`	Offset delay mode	`0x00`	Disable offset delay time setting
`0x91`	Camera link data format	`0x00`	Normal

After calculating calibration and geometric correction values.

0x27

Starts/stops scanning

0x01

Start scanning

If the energy levels are not satisfied with the timeout time according to the information in the heartbeat received every second:

If no UDP packet is received for 5 seconds -> CameraErrorCode ("Camera not streaming")

Action -> Call Initialize

If a UDP heartbeat packet is received with ErrorId ≠ 0x00 -> CameraErrorCode (Heartbeat error message)

Action -> Call Initialize

Name	Min	Max	Step	Unit
`GeneratorVoltage`	0	160	1	kV
`GeneratorCurrent`	0	10	0.1	mA